Back in July 2018 – midway through the project’s first breeding season, I identified 12 species to confirm in every block. Based on results from the first atlas, and my experience atlasing across the state, these 12 species seemed like they could be found pretty much anywhere. Whether that’s true is hard to say without ensuring that we have good coverage in every block. So, the next couple of months are the last chance to follow up and see if these species can be found in places they have not yet been reported from. Continue reading
Early morning at the mall
As 2021 is the last year of data collection for the breeding portion of the atlas project, our focus is very much on filling gaps – looking for species that have been missed and, especially, seeking evidence of confirmed breeding. As a result, whenever I go anywhere beyond my home blocks, I look for ways to fill a few gaps along my route. Continue reading
Fish crows in Connecticut
A recent post on the ctbirds listserv raised the question of whether fish crows nest in Connecticut. The subsequent discussion demonstrated that they do, and that nesting occurs in various parts of the state, but I thought it might be useful to see what the latest atlas data show. Continue reading
In search of pigeons
Earlier this week, I wrote about the value to the atlas of searching for house sparrows. The next day I had to drive to Brooklyn, Connecticut, so I took my own advice and looked for blocks with no house sparrow records between my destination and home. Sure enough, there were three, and with only minor detours to drive by farm buildings in each block I was able to find the species in all of them, confirming it in one where I saw a bird with nest material. I also confirmed breeding for house finch in one block, by seeing a female taking nest material into a bush where it was building a nest. Continue reading
Chasing sparrows
House sparrows are rarely a target species for most birders, but while we wait for the spring migrant floodgates to open, now would be a good time to look for them. Continue reading
Where have all the bobwhites gone?
Recent discussion on the Connecticut Ornithological Associations ctbirds listserve (starting with this post from Tom de Boor) has raised the question of whether northern bobwhites remain in the state. As Dave Provencher and others have pointed out, the species is widely considered to have been extirpated from Connecticut, and there is no longer a wild breeding population. Nonetheless, birds are still seen (or heard) from time to time, as a result of hunting releases. Continue reading
Helpful hints for locating great horned owls nesting sites
The final breeding season for the atlas is underway and although there are only a few species breeding already, great horned owls have been on nests for some time. The maps below, however, show that there are many places where the species was found in the 1980s that have no records from the current atlas: Continue reading
COA’s Big January: prizes galore!!
Many Connecticut birders will know that the Connecticut Ornithological Association has a long history of running a friendly competition every January, in which birders seek to find as many species as possible before the month ends. This year, the COA has changed the competition to encourage participation in the atlas. And to raise the stakes there are some seriously impressive prizes available. Continue reading
Atlas while you Christmas Count
Christmas Bird Count season is upon us. The first Connecticut count is on Tuesday, making today the start of Count Week for those of us in the Storrs area. (For a complete list of counts, click here.) All data collected during a Christmas Count can also be used for the winter atlas, of course, although doing this requires a little planning.
The easiest way to ensure that data can be used for the atlas is to enter observations directly into eBird, with a separate checklist for each site that you visit. Then, as with regular atlas work, simply share the checklist with “ctbirdatlas” and the data will come straight to us. If you are not an eBird user, then you can use the data forms on the atlas web site.
The one tricky part is that it is crucial to ensure that all birds on a given checklist fall within a single atlas block, as Christmas Count territories do not always align neatly with atlas block boundaries. For example, the area I survey on the Storrs count is a roughly diamond-shaped area between routes 195, 44, 32, and 175. As you can see from the image below, this area lies almost entirely within block 40D.
But, the two corners circled in yellow, fall in the adjacent blocks to the east and south. Consequently, when I’m in these parts of the territory, I have to remember to keep separate lists for birds seen on either side of the boundary.
The reason this matters is that all observations are assigned to blocks based on the point location for the checklist (the “pin” that you see on an eBird map). If that pin is in one block and you wander into the adjacent block, then we have no way of knowing which birds were seen in which block. Even if you add comments to the checklist, there is no way for us to subdivide the records into separate blocks except by re-entering all of the data into new checklists.
A good way to keep track of exactly where you are, relative to block boundaries, is to download the Google Earth app to your phone. On the atlas web site, we also have a .kml file showing the block boundaries, that you can save to your phone and then view in Google Earth. We’ve written about this before, but the key steps are:
-
- Download the Google Earth app.
- Save the block boundary map to your phone. Instructions on how to download the map can be found on the atlas web site here, and the map itself is here. Beware that these instructions were written for an iPhone in 2018 and some details might have changed, or might differ slightly on other devices.
- Add the block boundary map to Google Earth. On my current phone, this is a little different from 2018, but I found that these instructions worked well when I tried this afternoon.
As a bonus, we also have a file that you can download to show the Christmas Bird Count circles. If you save this and pull it up in Google Earth, you will get an image that looks like this one (note that we are missing a couple of recently added count circles):
With this in hand, you can zoom in to wherever you are, look for the blue dot to see your location, and make sure that you know which side of a block boundary you are on. By viewing both the block map and count circle map together, you can also make sure you stay within the circle.
To give another example, this next map shows my territory for the Moosup area of the Trailwoods Christmas Count. Most of my area in is blocks 44E and 59A, but it also includes the portion of 58B that lies east of 395. The green arc in the bottom left corner, shows the edge of the count circle, so keeping the app open lets me check to make sure I know exactly which block I’m in, and whether I’m staying with the Christmas Count circle.
One last thing. If you have used Google Earth in the past, but have found that the block grid sometimes disappears (this can happen, for example, after upgrading the app), we have instructions for how to “pin” the grid in place so that it is always visible when you open the app (thanks to Chris Howe for providing these, and to others for testing them).
Winter atlas owl surveys
Finding owls is always a treat, but can also be a challenge. This is a good time to be out listening, however, so we asked Frank Gallo to provide some tips on how to find owls for the winter atlas. His account follows:
Continue reading